Part Number 70675 is an aluminum Flat Back Extrusion that is 60 mm (2.36 in.) wide and 25 mm (2.36 in.) tall. Full Bar Length measuring 2438.4 mm (96 in. or 8 ft.)

7717-137DAPG is a lead conversion mounting pad for switching a TO-18 spacing to a TO-5 device lead spacing that is 5.8 mm long x 5.8 mm wide x 2.54 mm thick. This configuration allows for 4 leads and meets UL 94V-0.

Part Number 78220 is an aluminum Max Clip Extrusion that is 30 mm (1.18 in.) wide and 60 mm (1.18 in.) tall. Full Bar Length measuring 2499.4 mm (98.4 in. or 8.2 ft.)

NX501111 is an Indoor Outdoor LED heat sink that measures 186 mm in diameter x 70 mm in height. This heat sink is configured for a Osram Soleriq E30, E45, Ledil Holder mounting pattern.

7717-44NG is a lead conversion mounting pad for switching a TO-18 spacing to a TO-5 device lead spacing that measures 7.8 mm long x 7.8 mm wide x 3.18 mm thick. This configuration allows for 4 leads.

7721-4PPSG is a Polyphenylene Sulfide shoulder washer with a Outer Diameter (OD) of 7.92 mm, a shoulder diameter of 3.5 mm, an Inner Diameter (ID) of 3.97 mm, and a total height of 1.98 mm. This part was formerly known as Motorola part number B51547F011.

Part Number 75720 is an aluminum Flat Back Extrusion that is 91 mm (3.58 in.) wide and 14 mm (3.58 in.) tall. Full Bar Length measuring 2438.4 mm (96 in. or 8 ft.). This is a low usage extrusion if no stock is avaliable a set up charge could apply. Please contact sales for additional information.

Part Number 72085 is an aluminum Flat Back Extrusion that is 117 mm (4.61 in.) wide and 14 mm (4.61 in.) tall. Full Bar Length measuring 2438.4 mm (96 in. or 8 ft.)

Aavid Max Clips are a quick, robust attachment method that saves on labor and hardware costs while increasing performance and design flexibility. Max Clips eliminate the need for mounting holes, rivets and screws and apply consistent pressure at the center of the device improving contact with the heatsink and device for better thermal performance. Max Clips are available in standard lengths and are designed to fit most applications. There are also short and long clip options which will allow the device to be mounted higher or lower on the heatsink if needed. <br><br> MAX02NG clip measures 21.5 mm length x 12 mm width x 9.23 mm height. This clip is used to mount TO-220 devices to standard heat sinks. Representative image only.

Part Number 61965 is an aluminum Double Sided Extrusion With Gap(s) that is 127 mm (5 in.) wide and 57 mm (5 in.) tall. Full Bar Length measuring 2490.2 mm (98.04 in. or 8.17 ft.)