应用与设计

TIDA-01580

This reference design is a simple, wearable, multi-parameter, patient monitor that uses a single-chip, biosensing front end, the AFE4900 device, for synchronized electrocardiography (ECG) and photoplethysmography (PPG) measurements. The measured data is transferred to a remote location using the CC2640R2F device (supporting BLE 4.2 and 5). The reference design is operated using a single CR3032 battery and provides a battery life of 30 days. The raw data is available for the user to calculate heart-rate, oxygen concentration in blood (SpO2), pulse-transit time (PTT), and ECG. Two onboard light-emitting diodes (LEDs) indicate low-battery detection and ECG lead-off detection for users.
详情介绍
Simple, wearable, multi-parameter, patient monitor for PPG and ECG Provides raw data to calcuate heart rate, SpO2, and PTT Uses single-chip, biosensing front-end AFE4900 device for synchronized ECG and PPG measurements PPG (Optical heart-rate monitoring and SpO2) supports four LEDs and three photodiodes (PDs), with digital ambient subtraction to improve signal-to-noise ratio (SNR) ECG (LEAD I) signals Integrated Arm® Cortex®-M3 and 2.4-GHz RF transceiver (CC2640R2F) supports wireless data transfer - BLE 4.2 and 5.0 Operated by CR3032 (3-V, 500-mA coin-cell battery), with battery life of 30 dats using highly efficient DC/DC converters Small form factor helps with easy adaptation to wearable applications PPG (Optical heart-rate monitoring and SpO2) supports four LEDs and three photodiodes (PDs), with digital ambient subtraction to improve signal-to-noise ratio (SNR) ECG (LEAD I) signals