应用与设计

IH Cooking Heater (Mid-Range)

详情介绍

IH Cooking Heater (Mid-Range)

Overview

Renesas has a varied lineup of products suitable for use as the control MCUs, display-operation MCUs, and touch-key MCUs within an IH cooker application. These include the M16C/65 Group, the R8C/3x Series, the RL78/L1x Series, the R8C/Lx Series, the R8C/3xT Group, SH7149 Group and the V850E/Ix3. These MCUs provide IH control with improved performance, reduced power consumption, and lower cost.

System Block Diagram

Recommended Products

Block Semiconductor Device Recommended Product Name Features, etc.
Main MCU MCU V850E/Ix3 Three-phase PWM timer *1, enhanced A/D
M16C/63 Group
M16C/64A Group
M16C/65 Group
Three-phase PWM timer*1
General Purpose 16-bit MCU
R8C/3x Series
SH2( SH7010 , SH7040 ,
SH7046 , SH7080 ,
SH7124 , SH7125 ,
SH7137 , SH7144 ,
SH7147 , SH7606 )
Three-phase PWM timer *1
SH/Tiny Three-phase PWM timer *1, enhanced A/D
Panel control MCU MCU RL78/L1x Series On-chip LCD controller/driver, 16-bit mirocontroller
R8C/Lx Series
PFC power supply PFC IC R2A20114B Continuous conduction mode interleaving
R2A20112A Critical conduction mode interleaving
Sensor Op-amp READ2302GSP Full range Input/output , High slew rate
μPC4742, μPC4744 High slew rate
Grill heater TRIAC BCR16CM-12LB
BCR25CM-12LB
 
TRIAC control Photocoupler (standard) PS23xx Series
PS27xx Series
PS28xx Series
High isolation voltage (5kVr.m.s.), 4p-LSOP, Ta=115°C
High isolation voltage (3.75kVr.m.s.), 4p-SOP, Ta=110°C
High isolation voltage (2.5kVr.m.s.), 4p-SSOP, Ta=110°C
IGBT gate driver Photocoupler (IGBT drive) PS93xx Series
(6/8p-SDIP)
PS94xx Series
(16p-SOP)
PS95xx Series
(8p-DIP)
PS99xx Series
(8p-LSDIP)
High isolation voltage (5kV~7.5kVr.m.s.)
0.6~2.5A output
High CMR (CMR≧50kV/μs)

*1 PWM: Pulse Width Modulation

Related Software

Name Document No.
M3S-S2-Tiny sound playback system * -

*: Please contact your sales representative or contact us directly.

Related Boards

Name Part No.
R2A20114B evaluation board * -
R2A20112A evaluation board * -

*: Please contact your sales representative or contact us directly.