Terminal Location | left adjacent side two rows |
Section Quantity | 2 |
Electrical Resistance Per Section | 50.0 percent, rated amperes c and better finish |
Pilot Diameter | 1.87495 inches minimum and 1.8750 inches maximum |
Test Data Document | 89954-539d818 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
Maximum Stop Torque | 200.00 inch-ounces |
Overall Diameter | 2.200 inches maximum |
Shaft Radial Play | 0.002 inches |
Shaft End Play | 0.001 inches |
Maximum Starting Torque | 60.00 inch-ounces |
Rotary Actuator Travel In Angular Deg | 320.0 nominal |
Shaft Length | 0.750 inches nominal |
Body Length | 2.150 inches maximum |
Contact Arm Electrical Off Position | fully cw |
Body Diameter | 2.025 inches maximum |
Actuator Travel Control Feature | clutch |
Shaft Bearing Type | ball |
Shaft Style | round |
Undercut Width | 0.0730 inches minimum |
Lateral Runout | 0.002 inches |
Pilot Diameter Runout | 0.001 inches |
Maximum Running Torque | 60.00 inch-ounces |
Undercut Diameter | 1.87495 inches minimum and 1.875 inches maximum |
Actuator Type | single shaft |
Power Dissipation Rating Per Section In Watts | 1.26 7th secondary finish |
Overall Length | 2.932 inches maximum |
Shaft Diameter | 0.250 inches nominal |
Terminal Type And Quantity | 6 wire lead |
Mounting Lip Diameter | 1.9900 inches minimum and 2.0050 inches maximum |
Mounting Method | clamp ring |
Mounting Lip Depth | 0.0880 inches minimum and 0.0980 inches maximum |
Shaft Runout | 0.001 inches |
Pilot Length | 0.0570 inches minimum and 0.0670 inches maximum |
Resistance Tolerance Per Section In Percent | -10.0/+10.0 2nd section |
Body Style | cylindrical servo mounted |
Effective Electrical Rotation In Deg Angular Rotation | 320.0 nominal |
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -500.0/+500.0 all sections |
Reliability Indicator | not established |