| Terminal Location | lower adjacent side two rows |
| Section Quantity | 2 |
| Electrical Resistance Per Section | 10.000 kilohms all sections |
| Nonturn Device Radius | 0.305 inches nominal |
| Standard Taper Curve Per Section | a 1st section |
| Maximum Starting Torque | 4.00 inch-ounces |
| Shaft Length | 0.889 inches minimum and 0.951 inches maximum |
| Body Length | 1.000 inches minimum and 1.094 inches maximum |
| Screw Thread Diameter | 0.250 inches nominal |
| Shaft Style | round, stepped |
| Mounting Bushing Length | 0.234 inches minimum and 0.266 inches maximum |
| Actuator Type | dual concentric |
| Undercut Diameter | 0.077 inches minimum and 0.079 inches maximum |
| Maximum Running Torque | 0.10 inch-ounces |
| Power Dissipation Rating Per Section In Watts | 0.5 free air all sections |
| Shaft Diameter | 0.124 inches minimum and 0.126 inches maximum |
| Terminal Type And Quantity | 6 tab, solder lug |
| Nonturn Device Location | at 9 oclock |
| Mounting Method | standard bushing |
| Undercut Length | 0.295 inches nominal |
| Body Width | 0.625 inches nominal |
| Screw Thread Quantity Per Inch | 32.0 |
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 all sections |
| Body Style | rectangular bushing mounted |
| Screw Thread Series Designator | unef |
| Body Height | 0.625 inches nominal |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 all sections |
| Reliability Indicator | not established |
