| Terminal Location | lower adjacent side two rows |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 100.000 kilohms single section |
| Standard Taper Curve Per Section | a single section |
| Center To Center Distance Between Center Terminal And Outside Terminal | 0.090 inches minimum and 0.110 inches maximum |
| Maximum Starting Torque | 5.00 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 280.0 nominal |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 single section |
| Body Length | 0.180 inches minimum and 0.200 inches maximum |
| Actuator Travel Control Feature | stops |
| Maximum Running Torque | 5.00 inch-ounces |
| Actuator Type | flush drive with slot-hole |
| Power Dissipation Rating Per Section In Watts | 0.5 free air single section |
| Terminal Type And Quantity | 3 pin |
| Mounting Method | terminal |
| Body Width | 0.360 inches minimum and 0.390 inches maximum |
| Terminal Length | 0.180 inches minimum |
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 single section |
| Body Style | rectangular |
| Center To Center Distance Between Terminals | 0.180 inches minimum and 0.220 inches maximum |
| Center To Center Distance Between Terminal Rows | 0.090 inches minimum and 0.110 inches maximum |
| Body Height | 0.360 inches minimum and 0.390 inches maximum |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 280.0 nominal |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -100.0/+100.0 single section |
