Keying | Keyway Polarization N |
Contact Quantity (Size 12 Coax) | - |
Circuit Application | Signal |
Positive Stop Ferrule | - |
Connector & Contact Terminates To | Wire & Cable |
Alignment Keyed | Clocking |
Contact Quantity (Size 12) | - |
Contact Type | Socket |
Position Keyed | N |
Sealable | Yes |
Contact Quantity (Size 20) | - |
Number of Power Positions | 0 |
Contact Quantity (Size 16) | - |
Environmental Protection | Yes |
O-Ring Material | - |
Termination Method to Wire & Cable | - |
Shielded | Yes |
Assembly Type | Electrical Connector |
Contact Current Rating (Max) | 5 |
Panel Mount Feature | With |
Panel Thickness | - |
Contact Layout Arrangement | 25 – 35 |
Operating Voltage | 400 |
Mating Alignment Type | Keyed |
Packaging Quantity | 1 |
Position Locations Omitted | All |
PCB Mount Alignment | - |
Connector Mounting Type | Panel |
Prewired | - |
Shell Type | Square Flange Receptacle |
Number of Signal Positions | 128 |
Flange | Square Flange |
End Node Category | Standard Circular Connectors |
UL Flammability Rating | - |
IP Water Sealing Level | - |
Reverse Gender | No |
Assembly Length | 1.24 |
Weight | - |
Accessory Color | - |
Brand | DEUTSCH |
Insulation Material | Hard Dielectric/Silicone |
Hermetically Sealed | No |
Mating Retention Type | Triple Start Threaded |
Product Type | Connector |
Connector Style | Receptacle |
Shield Rating | - |
Shell Material | Aluminum 6061-T6 |
Panel Mount Feature Type | Square Flange |
Contact Quantity (Size 22D) | 128 |
Approved Standards | - |
Feedthrough Type | No |
Fluid Type | MIL-DTL-83133 (JP-8) |
Durability Rating | 500 |
Connector System | Cable-to-Panel |
TE Internal Number | DTS20F25-35SN |
Data Rate | - |
Factory Installed Backshell | No |
Voltage | 1300 |
Polarization Code | N |
IP Dust Sealing Level | - |
Preloaded | No |
Wire/Cable Size | .08 – .33 |
Shell Plating Material | Electroless Nickel |
Mating Alignment | - |
Field Serviceable | - |
Number of Positions | 128 |
Contact Quantity (Size 8 Databus) | - |
Operating Temperature Range | -65 – 200 |
Centerline (Pitch) | - |
Pigtail Length | - |
PCB Mount Retention | - |
Entry Style | Rear Insertion |
Peripheral Seal Material | Silicone |
Mating Retention | With |
Shell Size | 25 |
Environmental Protection Type | Elastomer Sealed |
Fluid Resistance | Yes |
Accepts Wire Insulation Diameter Range | .76 – 1.37 |