| Vacuum Tape | - |
| Contact Mating Area Plating Material | Gold Flash over Palladium Nickel or Gold over Nickel |
| Polarization | With |
| Circuit Application | Signal |
| Housing Material | PCT GF |
| Connector & Contact Terminates To | Printed Circuit Board |
| Locking Latch | - |
| Contact Type | Pin |
| Sealable | - |
| Contact Base Material | Brass, Phosphor Bronze |
| Termination Method to Wire & Cable | - |
| Ejection Latches | With |
| Latch Color | Red |
| Contact Current Rating (Max) | 1 |
| Panel Mount Feature | Without |
| Wire/Cable Type | - |
| Header Type | Universal Ejection Pin Headers |
| Operating Voltage | 250 |
| Mating Alignment Type | Center & Dual |
| PCB Thickness (Recommended) | 1.57 |
| Packaging Quantity | 18 |
| PCB Contact Termination Area Plating Material | Tin |
| Boardlock Material | - |
| Insulation Resistance | 1000 – 5000 |
| Solder Tail Contact Plating Material Finish | Matte |
| PCB Mount Alignment | Without |
| Connector Mounting Type | Board Mount |
| Tail Length | - |
| End Node Category | Ribbon Cable Connectors |
| UL Flammability Rating | - |
| Contact Termination Area Plating Material | Tin |
| Shrouded End Dimension | 3.81 |
| Contact Termination Area Plating Thickness | 2.54 |
| CSA File Number | - |
| Brand | AMP |
| Solder Tail Contact Plating Thickness | Nickel: 50 |
| UL Rating | - |
| PCB Mount Orientation | Vertical |
| Mating Retention Type | - |
| Product Type | Connector |
| Contact Mating Area Plating Thickness | .76 |
| Contact Underplating Material | Nickel |
| Mating Connector Lock | With |
| Connector Style | Plug |
| Mating Post Length | - |
| PCB Mount Retention Type | - |
| Termination Post Length | 2.79 |
| Contact Transmits (Typical) | Signal (Data) |
| Panel Mount Feature Type | Mounting Ears |
| Latch Material | PCT |
| Contact Design | Square Post |
| UL File Number | - |
| Contact Layout | - |
| Daisy Chain | - |
| Contact Termination Type | - |
| Profile | Standard |
| Post Size | .64 |
| Agency/Standard | - |
| Contact Retention in Housing | Press-Fit |
| Connector System | Wire-to-Board |
| TE Internal Number | 5111374-6 |
| Insulation Diameter | - |
| Housing Style | 4-Sided |
| Connector Type | Header |
| Cover Material | - |
| Height | 8.636 |
| Housing Entry Style | - |
| Mating Alignment | With |
| Wire/Cable Size | - |
| Width | - |
| Temperature Rating | High |
| Comment | Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. |
| Number of Rows | 2 |
| For Use With | Receptacles With Strain Relief |
| Number of Positions | 26 |
| Type of Connector | - |
| Operating Temperature Range | -65 – 105 |
| Centerline (Pitch) | .1 |
| Board Standoff | Without |
| Mating Connector Lock Type | Latch |
| Termination Method to Printed Circuit Board | Through Hole |
| PCB Mount Retention | Without |
| Contact Shape | Square |
| UL Voltage Rating | - |
| Length | 2.06 |
| Housing Color | Red |
| Packaging Method | Tray |
| Latch Type | Long |
| Mating Retention | Without |
| Post Numbers Omitted | None |
| Row-to-Row Spacing | 2.54 |
| Accepts Wire Insulation Diameter Range | - |
TE 微信客服
TE Connectivity
