| Contact Mating Area Plating Material | - |
| Circuit Application | Power & Signal |
| Seal Type | - |
| Housing Material | Nylon |
| Backwall/Post Interruptions | - |
| Contact Type | Socket |
| Number of Power Positions | - |
| Contact Base Material | Phosphor Bronze |
| Special Features | - |
| Glow Wire Rating | Standard Part - Not Glow Wire |
| Panel Thickness | - |
| Mating & Unmating Configuration | - |
| Connector Circuit Configuration (Number of Pos/Type) | - |
| Boardlock Material | - |
| Insulation Resistance | - |
| Connector Mounting Type | Cable Mount |
| Number of Active Positions | - |
| End Node Category | Rectangular Power Connectors |
| UL Flammability Rating | UL 94V-0 |
| Contact Termination Area Plating Material | - |
| Contact Termination Area Plating Thickness | - |
| CSA File Number | - |
| Cable Exit Angle | - |
| Contact Size | - |
| Mating Retention Type | Locking Latch |
| Mating Post Length | - |
| CSA Rating | - |
| Contact Retention Type | - |
| Circuit Identification Feature | - |
| Power Contact Material | - |
| Contact Design | - |
| Tab Width | - |
| Contact Layout | Inline |
| Solder Process Feature | - |
| Agency/Standard | - |
| Wire & Cable IDC Installation Type | - |
| Connector System | Wire-to-Board |
| TE Internal Number | 2132781-5 |
| Housing Style | - |
| Glow Wire Material Rating | - |
| Width | 13.3 |
| Mating Alignment | With |
| Wire/Cable Size | - |
| Termination Post & Tail Length | - |
| Contact Termination Area Plating Finish | - |
| Number of Positions | 5 |
| Operating Temperature Range | -67 – 221 |
| Insulation Diameter (Max) | - |
| PCB Mount Retention | Without |
| Strain Relief | Without |
| Length | .801 |
| Multiple Contact Types | - |
| Backwall Interruptions Between Posts | - |
| Housing Color | Natural |
| Underplate Material Thickness | - |
| Mating Retention | With |
| Post Numbers Omitted | - |
| Row-to-Row Spacing | - |
| Keying | - |
| Connector & Contact Terminates To | Wire & Cable |
| Contact Retention | Without |
| Sealable | No |
| Termination Method to Wire & Cable | Crimp |
| Position Locations Loaded | - |
| Shielded | - |
| Contact Current Rating (Max) | 6.5 |
| Wire Type | - |
| Panel Mount Feature | Without |
| Wire/Cable Type | - |
| Header Type | - |
| Operating Voltage | 600 |
| Mating Alignment Type | - |
| PCB Thickness (Recommended) | - |
| Packaging Quantity | 1000 |
| Accepts Cable Diameter (Max) | - |
| Assembly Integration Feature | - |
| Position Locations Omitted | - |
| PCB Mount Alignment | - |
| Screw & Hole Thread Size | - |
| Number of Signal Positions | - |
| Wire Color | - |
| Contact Mating Area Plating Material Finish | - |
| Brand | TE Connectivity |
| UL Rating | - |
| Number of Columns | - |
| PCB Mount Orientation | - |
| Product Type | Housing |
| Contact Mating Area Plating Thickness | - |
| Contact Underplating Material | - |
| PCB Mount Retention Type | - |
| Stacking Configuration | - |
| Housing Type | Receptacle |
| Panel Mount Feature Type | - |
| Number of Loaded Positions | - |
| Insertion Force | - |
| Number of Blocked Positions | - |
| Board-to-Board Configuration | - |
| Assembly or Kit | - |
| VDE Tested | - |
| Height | 11 |
| Interface Type | - |
| Comment | - |
| Number of Rows | 1 |
| For Use With | - |
| Right Angle Bending Side | - |
| Agency/Standard Number | - |
| Centerline (Pitch) | 3.96 |
| Dielectric Withstanding Voltage (Max) | - |
| Termination Method to Printed Circuit Board | - |
| Assembly Process Feature | - |
| Number of Modules | - |
| Signal Contact Base Material | - |
| PCB Mount Alignment Type | - |
| Packaging Method | Bag |
| Accepts Wire Insulation Diameter Range | .067 – .118 |
TE 微信客服
TE Connectivity
