| Contact Mating Area Plating Material | - |
| Circuit Application | - |
| Shrouded | Partially Shrouded |
| Connector & Contact Terminates To | Printed Circuit Board |
| Housing Material | - |
| Shield Material | - |
| Make First / Break Last | - |
| Number of Pairs | - |
| Number of Ground Positions | - |
| Contact Type | - |
| Sealable | - |
| Card Slot Centerline | - |
| Number of Power Positions | - |
| Contact Base Material | - |
| Contact Current Rating (Max) | 1.5 |
| Board | - |
| Mating Alignment Type | - |
| Operating Voltage | - |
| PCB Thickness (Recommended) | - |
| PCB Contact Termination Area Plating Material | - |
| PCB Mount Alignment | - |
| Connector Mounting Type | - |
| Tail Length | - |
| Pairs per Column | - |
| Number of Signal Positions | - |
| End Node Category | High Speed Backplane Connectors |
| UL Flammability Rating | - |
| Contact Termination Area Plating Material | - |
| Number of Differential Pairs per Column | - |
| Brand | TE Connectivity |
| Contact Mating Area Length | - |
| Number of Columns | 10 |
| UL Rating | - |
| Guide Pin Style | - |
| PCB Mount Orientation | Right Angle |
| Product Type | - |
| Connector Style | Receptacle |
| Contact Underplating Material | - |
| Contact Mating Area Plating Thickness | - |
| Stackable | - |
| PCB Mount Retention Type | - |
| Termination Post Length | - |
| Contact Transmits (Typical) | - |
| Impedance | - |
| Guide Hardware | - |
| Module Type | - |
| Contact Design | - |
| UL File Number | - |
| Board-to-Board Configuration | Right Angle |
| Contact Layout | - |
| End Wall Location | - |
| Durability Rating | - |
| Agency/Standard | - |
| Guide Location | Center |
| Connector System | Board-to-Board |
| Differential Impedance | - |
| TE Internal Number | 2102318-1 |
| Data Rate | - |
| Termination Type | - |
| Connector Type | - |
| PCB Hole Diameter | - |
| Height | - |
| Preloaded | - |
| Mating Alignment | Without |
| Interface Type | - |
| Width | - |
| Comment | - |
| Speed | - |
| Number of Rows | 9 |
| For Use With | - |
| Number of Positions | 90 |
| Contact Style | - |
| Operating Temperature Range | - |
| Centerline (Pitch) | .075 |
| CSA Certified | - |
| PCB Contact Termination Area Plating Material Finish | - |
| Signal Arrangement | Single Ended |
| Termination Method to Printed Circuit Board | - |
| PCB Contact Termination Area Plating Thickness | - |
| PCB Mount Retention | - |
| UL Voltage Rating | - |
| Post Type | - |
| Length | - |
| PCB Mount Alignment Type | - |
| Housing Color | - |
| Stack Height | - |
| Contact Length | - |
| Packaging Method | - |
| Underplate Material Thickness | - |
| Mating Retention | - |
| Row-to-Row Spacing | 1.6 |
TE 微信客服
TE Connectivity
