| Contact Mating Area Plating Material | Tin |
| Circuit Application | Signal |
| Number of Insulation Displacement Slots | - |
| Housing Material | Thermoplastic Polyester |
| PCB Tail Length | 2.8 |
| Contact Type | Pin |
| Position Keyed | - |
| Number of Power Positions | - |
| Contact Base Material | Brass |
| PCB Contact Termination Area Plating Material | - |
| Solder Tail Contact Plating Material Finish | - |
| Connector Mounting Type | Board Mount |
| Keying Rib Location | - |
| End Node Category | Standard Edge Connectors |
| Daughter Board Thickness | - |
| Signal Contact Material | - |
| UL Flammability Rating | - |
| Contact Termination Area Plating Material | Tin |
| Contact Termination Area Plating Thickness | - |
| Cable Exit Angle | - |
| CSA File Number | - |
| Mating Retention Type | - |
| Termination Post Length | 2.8 |
| Contact Transmits (Typical) | Signal |
| Contact Retention Type | - |
| Post Plating Material Finish | - |
| Shape | Rectangular |
| Power Contact Material | - |
| Contact Design | Dual Beam |
| Pre-Assembled | - |
| Standoffs | - |
| Profile | Standard |
| Agency/Standard | - |
| Connector System | Board-to-Board |
| TE Internal Number | 106740-4 |
| Number of Pylons | - |
| Housing Style | - |
| Connector Type | Header |
| Preloaded | - |
| High Current | - |
| Mating Alignment | With |
| Wire/Cable Size | - |
| Width | .54 |
| End Caps | - |
| Number of Positions | 160 |
| Operating Temperature Range | -67 – 257 |
| Signal Contact Plating Material | - |
| Post Plating Thickness | - |
| PCB Mount Retention | With |
| Connector Design | Solder Tail |
| Locking Clip Location | None |
| Card Entry Style | - |
| Bus Type | - |
| Length | 3.69 |
| Housing Color | Gray |
| Post Styles | Solder Tail |
| Mating Retention | Without |
| Row-to-Row Spacing | 2.54 |
| Keying Plug Material | - |
| Connector & Contact Terminates To | Printed Circuit Board |
| Accepts Card Thickness | - |
| Contact Retention | Without |
| Connector Contact Load Condition | Fully Loaded |
| Termination Method to Wire & Cable | - |
| Contact Current Rating (Max) | 1.5 |
| Panel Mount Feature | Without |
| Wire/Cable Type | - |
| Operating Voltage | - |
| Mating Alignment Type | Polarization |
| PCB Thickness (Recommended) | 2.03 – 2.54 |
| Packaging Quantity | - |
| Position Locations Omitted | - |
| PCB Mount Alignment | Without |
| Tail Length | - |
| Post Plating Material | Tin over Nickel |
| Color | Gray |
| Keying Between Cavity Numbers | - |
| Contact Mating Area Plating Material Finish | - |
| Brand | AMP |
| PCB Mount Orientation | Right Angle |
| Product Type | Connector |
| Connector Style | Plug |
| Contact Underplating Material | Nickel |
| Contact Mating Area Plating Thickness | - |
| PCB Mount Retention Type | Mounting Screw |
| Panel Mount Feature Type | - |
| 端子端接区域电镀厚度 | - |
| Hot Pluggable | No |
| Board-to-Board Configuration | Co-Planar |
| Mounting Ear Insert Material | - |
| Mounting Ear Position | - |
| Accepts Card Width | - |
| Height | 22.8 |
| PCB テール長 | .11 |
| Comment | - |
| Number of Rows | 5 |
| Internal/External | - |
| For Use With | - |
| Type of Connector | Standard |
| Card Slot Depth | - |
| Centerline (Pitch) | .1 |
| Material | - |
| PCB Contact Termination Area Plating Material Finish | - |
| Termination Method to Printed Circuit Board | Through Hole - Solder |
| Post Alignment | - |
| PCB Retention Location | - |
| UL Voltage Rating | - |
| Post Type | Solder |
| Packaging Method | - |
| Number of Dual Positions | - |
| Accessory Type | - |
| Mounting Ear Style | - |
| Accepts Wire Insulation Diameter Range | - |
TE 微信客服
TE Connectivity
