TE 微信客服
TE Connectivity
1-1971846-4 规格参数
| Contact Mating Area Plating Material | Silver |
| Polarized Positions | - |
| Circuit Application | - |
| Jackscrews | - |
| Housing Material | Nylon |
| Backwall/Post Interruptions | Without |
| Center Fastener | - |
| Contact Type | Tab |
| Position Keyed | 1C |
| Number of Pairs | - |
| Number of Power Positions | - |
| Alternating Leads | - |
| Contact Base Material | Copper Alloy |
| Wire Material | - |
| Glow Wire Rating | - |
| Panel Thickness | - |
| PCB Connector Assembly Type | PCB Mount Header |
| PCB Contact Termination Area Plating Material | Silver |
| Insulation Resistance | - |
| Connector Mounting Type | - |
| Mating Pin-to-PCB Dimension | - |
| Stamped and Formed | - |
| End Node Category | Wire-to-Board Headers & Receptacles |
| Termination Style | - |
| UL Flammability Rating | UL 94V-0 |
| Wire Contact Termination Area Plating Material Finish | - |
| Dielectric Withstanding Voltage | - |
| Shrouded End Dimension | - |
| Stuffer Label | - |
| CSA File Number | - |
| Cable Exit Angle | - |
| Contact Size | - |
| Pass-Through Hole Size | - |
| Mating Retention Type | Latch |
| Mating Post Length | - |
| Mating Connector Lock | - |
| Termination Post Length | - |
| Contact Transmits (Typical) | Signal (Data) |
| CSA Rating | - |
| Contact Retention Type | - |
| Wire Contact Termination Area Plating Material | - |
| Height above PC Board | - |
| Number of Standoffs | - |
| Contact Design | - |
| Tab Width | - |
| Contact Layout | - |
| Mounting/Mating Hardware | - |
| Profile | - |
| Agency/Standard | - |
| Lock Style | - |
| Connector System | Wire-to-Board |
| Header Mating Direction | - |
| TE Internal Number | 1-1971846-4 |
| Housing Plating Material | - |
| Housing Style | - |
| Preloaded | Yes |
| Wire/Cable Size | - |
| Mating Alignment | - |
| Width | - |
| Housing Entry Style | - |
| Number of Positions | 4 |
| Operating Temperature Range | -40 – 248 |
| Board Standoff | - |
| CSA Certified | - |
| PCB Contact Termination Area Plating Thickness | - |
| PCB Mount Retention | Without |
| Connector Design | - |
| Lock Type | - |
| Jackscrew Type | - |
| Type | - |
| Strain Relief | - |
| Connector Configuration | - |
| Length | 22.3 |
| Backwall Interruptions Between Posts | - |
| Housing Color | Natural |
| Underplate Material Thickness | - |
| Mating Retention | Without |
| Post Numbers Omitted | - |
| Row-to-Row Spacing | 5 |
| Inside Polarization Key Location | - |
| Keying | - |
| Posted Contacts | - |
| Connector & Contact Terminates To | Printed Circuit Board |
| Wire Entry Location | - |
| Sealable | No |
| Contact Retention | Without |
| Mating Area Interface Dimensions | 6.35 mm |
| Packaging Reel Diameter | - |
| Termination Method to Wire & Cable | - |
| Connector Contact Load Condition | - |
| Shielded | - |
| Contact Current Rating (Max) | - |
| Boss | - |
| Wire/Cable Type | - |
| Panel Mount Feature | - |
| Header Type | Shrouded |
| Operating Voltage | 250 |
| Mating Alignment Type | Keyed |
| PCB Thickness (Recommended) | - |
| Packaging Quantity | 90 |
| Surface Mount Extended Leads | - |
| PCB Mount Alignment | With |
| Tail Length | 3.5 |
| Number of Signal Positions | - |
| Stamped | - |
| Threaded Mounting Hole | - |
| PCB Mounting Style | Through Hole |
| Contact Mating Area Plating Material Finish | Matte |
| Brand | TE Connectivity |
| UL Rating | - |
| Number of Columns | - |
| PCB Mount Orientation | Vertical |
| Product Type | Connector |
| Contact Mating Area Plating Thickness | 1 |
| Connector Style | - |
| Contact Underplating Material | - |
| Threaded Mounting Holes | - |
| PCB Mount Retention Type | None |
| Stackable | - |
| Wire Contact Termination Area Plating Thickness | - |
| Housing Temperature Rating | - |
| Panel Mount Feature Type | - |
| Number of Loaded Positions | - |
| Applied Pressure | - |
| Latch Material | - |
| Short Circuit Position | - |
| Number of Blocked Positions | - |
| UL File Number | - |
| Hot Pluggable | - |
| Daisy Chain | - |
| Approved Standards | - |
| Pick and Place Cover | - |
| Post Size | - |
| Locking Latch Between Cavity Number | - |
| Insulation Diameter | - |
| VDE Tested | - |
| Height | 12.8 |
| Center Fastener Type | - |
| Turnable Jackscrew Combination | - |
| Temperature Rating | - |
| Comment | - |
| Number of Rows | 1 |
| Termination Resistance | - |
| For Use With | Connector/Cable Assembly |
| Right Angle Bending Side | - |
| Agency/Standard Number | - |
| RAST Version | - |
| Surface Mount Extended Lead Length | - |
| Centerline (Pitch) | .197 |
| Keying Rib Cavity Number (between or at) | - |
| PCB Contact Termination Area Plating Material Finish | - |
| Mating Connector Lock Type | - |
| Termination Method to Printed Circuit Board | - |
| Threaded Jackscrew Hole (Receptacles Only) | - |
| Hardware Type | - |
| Post-Mating Assembly Measurement | - |
| Wire Stuffer Cap Color | - |
| Contact Shape | Square |
| Post Type | - |
| PCB Mount Alignment Type | Polarizing Pegs |
| Polarizing Rib Location | - |
| MIL-C-55032 | - |
| Stack Height | - |
| Packaging Method | Tube/Box |
数据手册
非常抱歉我们暂时未能收集到您需要的数据手册，请留下您的联系方式，我们将会在收集到相关资料后第一时间为您反馈，感谢您对我们平台的信赖和支持！