| Features Provided | nonmetallic shaft |
| Terminal Location | radially positioned over less than half the circumference |
| Section Quantity | 2 |
| Electrical Resistance Per Section | 14.7 kilohms 2nd section |
| Pilot Diameter | 0.4995 inches minimum and 0.5005 inches maximum |
| Mounting Hole/stud Circle Diameter | 1.000 inches nominal |
| Test Data Document | 19315-1807978 drawing |
| Overall Diameter | 1.115 inches maximum |
| Shaft End Play | 0.005 inches |
| Maximum Starting Torque | 1.00 inch-ounces (ounce-inches) |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 all sections |
| Rotary Actuator Travel In Angular Deg | 360.0 nominal |
| Shaft Length | 0.625 inches nominal |
| Body Length | 1.220 inches maximum |
| Body Diameter | 0.979 inches maximum |
| Actuator Travel Control Feature | continuous motion |
| Function Characteristic Per Section | all sections linear |
| Undercut Width | 0.0570 inches minimum |
| Angle Between Centerlines Of Mounting Holes In Deg | 120.0 |
| Undercut Diameter | 0.781 inches maximum |
| Actuator Type | double ended shaft |
| Power Dissipation Rating Per Section In Watts | 2.0 free air all sections |
| Terminal Type And Quantity | 6 turret |
| Overall Length | 2.262 inches maximum |
| Shaft Diameter | 0.250 inches nominal |
| Angle Of Mounting Hole In Deg | 90.0 |
| Mounting Lip Diameter | 0.8700 inches minimum and 0.8800 inches maximum |
| Mounting Method | clamp ring |
| Function Conformity Tolerance Per Section | m1.00/p10.00 all sections |
| Function Conformity Per Section | all sections independent linearity |
| Mounting Lip Depth | 0.0570 inches minimum and 0.0670 inches maximum |
| Pilot Length | 0.0570 inches minimum and 0.0670 inches maximum |
| Resistance Tolerance Per Section In Percent | m10.0/p10.0 1st section |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 all sections |
| Effective Electrical Rotation In Deg Angular Rotation | 354.0 nominal |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | m400.0/p400.0 all sections |
