| Terminal Location | radially positioned over less than half the circumference | 
| Nonturn Device Radius | 0.422 inches minimum and 0.554 inches maximum | 
| Electrical Resistance Per Section | 2.5 kilohms single section | 
| Section Quantity | 1 | 
| Test Data Document | 81349-mil-r-94 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type | 
| Maximum Stop Torque | 128.00 inch-ounces | 
| Overall Diameter | 1.274 inches maximum | 
| Standard Taper Curve Per Section | a single section | 
| Maximum Starting Torque | 6.00 inch-ounces | 
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 120.0 single section | 
| Rotary Actuator Travel In Angular Deg | 251.0 minimum and 318.0 maximum | 
| Shaft Length | 0.844 inches minimum and 0.906 inches maximum | 
| Body Length | 0.437 inches minimum and 0.469 inches maximum | 
| Body Diameter | 0.890 inches minimum and 0.922 inches maximum | 
| Actuator Travel Control Feature | stops | 
| Specification/standard Data | 81349-mil-r-94/4 government specification | 
| Screw Thread Diameter | 0.375 inches nominal | 
| Shaft Style | round, slotted | 
| Mounting Bushing Length | 0.359 inches minimum and 0.391 inches maximum | 
| Actuator Type | single shaft | 
| Power Dissipation Rating Per Section In Watts | 1.0 free air single section | 
| Shaft Diameter | 0.248 inches minimum and 0.251 inches maximum | 
| Terminal Type And Quantity | 3 tab, solder lug | 
| Overall Length | 1.281 inches minimum and 1.375 inches maximum | 
| Nonturn Device Location | at 9 oclock | 
| Mounting Method | standard bushing | 
| Screw Thread Quantity Per Inch | 32.0 | 
| ~1 | data on certain environmental and performance r | 
| Body Style | cylindrical bushing mounted | 
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 single section | 
| Screw Thread Series Designator | unef | 
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 single section | 
| Reliability Indicator | not established |