Sorensen

The 215 Watt XDL35-5T, one of the XDL Series of DC Power Supplies, features: Triple Output model The XDL35-5T has two main outputs plus one auxiliary output. The two main outputs are independent and isolated. Illuminated keys selects which output is to be adjusted and provide unambiguous indication. In "linked" mode, all adjustments are applied to both outputs simultaneously. Linked mode can provide tracking outputs and is particularly useful when the user wishes to wire the outputs in series or parallel to obtain higher voltages or currents. A "copy" function allows all of the settings of one output to be duplicated on the other prior to linking. For even greater flexibility, the outputs can be linked when set to different voltages or currents allowing separate settings to be loaded into the linked-mode memories for simultaneous recall. A third output intended for powering logic and other low voltage circuitry. This output is fully isolated from the main outputs and provides programmable voltage from 1.000 to 6.000 volts at a current of up to 3.0 amps. Each output has its own illuminated dc on/off key providing completely independent control. For situations where power needs to be connected or disconnected from all three outputs together, master on/off keys are also provided. Fully Programmable via GPIB, RS-232, USB or LAN ("P" Models) Models with a P suffix incorporate a full bus interface enabling remote control and readback via either GPIB, RS-232, USB, or LAN (LXI-C). P versions incorporate output power and sense terminals on the rear panel in addition to the front panel. All power supply settings can be controlled via the bus. Voltage and current can be set to a resolution of 1 mV or 0.1 mA for each main output. Actual voltage and current can be read back along with the power supply status. Go to the Sorensen XDL Series Programmable DC Power Supplies product page for more details, options, and accessories. >>