| Precious Material | silver |
| Thread Series Designator | unc |
| Thread Quantity Per Inch | 32 |
| Test Data Document | 81205-bacc182l10a drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps | 1500.0 ac all locations |
| Center To Center Distance Between Terminals Parallel To Length | 1.471 inches minimum and 1.501 inches maximum |
| Reset Method | manual |
| Pole Quantity | 3 |
| Circuit Protection Type | overcurrent all locations |
| Manual Actuator Type And Quantity | 1 push-pull |
| Trip Release Ambient Temp Rating | 25.0 deg celsius nominal all locations |
| Mounting Facility Type And Quantity | 6 threaded hole |
| Actuator Function | trip-reset |
| Operating Voltage Type And Rating Per Pole In Volts | 200.0 ac all locations |
| Body Length | 2.200 inches maximum |
| Fragility Factor | moderately rugged |
| Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 0.735 inches minimum and 0.751 inches maximum |
| Actuator Position Designation | at pole two |
| Trip Release Method | thermal all locations |
| Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent | 150.0 all locations |
| Main Contact Tripping Mechanism Type | trip free |
| Case Material | plastic |
| Inclosure Protection Type For Which Designed | general purpose |
| Trip Release Characteristic | time delay all locations |
| Unpackaged Unit Weight | 0.500 pounds |
| Frequency In Hertz | 400.0 all locations |
| Nominal Thread Size | 0.138 inches |
| Terminal Type And Quantity | 6 screw |
| Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 1.780 inches minimum and 1.840 inches maximum |
| Precious Material And Location | terminal surfaces silver |
| Bushing Length | 0.220 inches minimum and 0.280 inches maximum |
| Body Width | 2.250 inches maximum |
| Center To Center Distance Between Terminals Parallel To Width | 0.735 inches minimum and 0.751 inches maximum |
| Body Style | multipole-single actuator type |
| Trip Delay Time In Seconds Per Rated Continuous Current | 10.000 minimum at 200 pct all locations and 65.000 maximum at 200 pct all locations |
| Body Height | 2.125 inches maximum |
| Maximum Continuous Load Current Rating Per Pole | 10.0 amperes ac all locations |
| Storage Type | general purpose warehouse |
| Internal Trip Release Configuration | series trip all locations |
