| Mounting Facility Quantity | 3 |
| Terminal Location | radially positioned over less than half the circumference |
| Features Provided | nonmetallic shaft |
| Iii Overall Length | 4.986 inches nominal |
| Maximum Stop Torque | 30.00 inch-ounces |
| Shaft End Play | 0.00500 inches |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 85.0 all sections |
| Tap Location Tolerance Per Section | -0.5 to 0.5 deg angular rotation all sections |
| Body Length | 4.048 inches maximum |
| Body Diameter | 2.000 inches nominal |
| Actuator Travel Control Feature | continuous motion |
| Shaft Bearing Type | ball |
| Shaft Style | 1c round |
| Undercut Width | 0.0930 inches nominal |
| Lateral Runout | 0.001 inches |
| Angle Between Centerlines Of Mounting Holes In Deg | 90.0 |
| Undercut Diameter | 1.875 inches nominal |
| Maximum Running Torque | 1.50 inch-ounces |
| Angle Of Mounting Hole In Deg | 120.0 |
| Mounting Lip Diameter | 2.0000 inches nominal |
| Mounting Method | threaded hole |
| Screw Thread Quantity Per Inch | 32.0 |
| Mounting Lip Depth | 0.0620 inches nominal |
| Pilot Length | 0.0620 inches nominal |
| Reliability Indicator | not established |
| Section Quantity | 2 |
| Electrical Resistance Per Section | 10.000 kilohms all sections |
| Pilot Diameter | 0.7490 inches minimum and 0.7500 inches maximum |
| Mounting Hole/stud Circle Diameter | 0.937 inches nominal |
| Maximum Starting Torque | 2.00 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 3600.0 minimum and 3601.0 maximum |
| Shaft Length | 0.938 inches nominal |
| Screw Thread Diameter | 0.164 inches nominal |
| Function Characteristic Per Section | all sections linear |
| Pilot Diameter Runout | 0.00100 inches |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 5.0 free air all sections |
| Terminal Type And Quantity | 8 turret |
| Shaft Diameter | 0.250 inches nominal |
| Function Conformity Tolerance Per Section | -0.02 to 0.02 all sections |
| Fixed Tap Quantity Per Section | 1 2nd section |
| Function Conformity Per Section | all sections independent linearity |
| Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius | -25.0 to 25.0 all sections |
| Shaft Runout | 0.001 inches |
| Body Style | 4b cylindrical servo mounted |
| Resistance Tolerance Per Section In Percent | -0.5 to 0.5 all sections |
| Screw Thread Series Designator | unc |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 all sections |
| Effective Electrical Rotation In Deg Angular Rotation | 3600.0 minimum and 3601.0 maximum |
