| Mounting Facility Quantity | 3 |
| Terminal Location | radially positioned over more than half the circumference |
| Iii Overall Length | 5.017 inches maximum |
| Maximum Stop Torque | 480.00 inch-ounces |
| Shaft End Play | 0.00500 inches |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 85.0 all sections |
| Tap Location Tolerance Per Section | -0.5 to 0.5 deg angular rotation all sections |
| Body Length | 4.048 inches maximum |
| Actuator Travel Control Feature | stops |
| Body Diameter | 2.000 inches maximum |
| Shaft Bearing Type | ball |
| Shaft Style | 1c round |
| Undercut Width | 0.0930 inches nominal |
| Lateral Runout | 0.001 inches |
| Angle Between Centerlines Of Mounting Holes In Deg | 120.0 |
| Maximum Running Torque | 1.50 inch-ounces |
| Undercut Diameter | 1.875 inches maximum |
| Angle Of Mounting Hole In Deg | 90.0 |
| Mounting Lip Diameter | 2.0000 inches nominal |
| Mounting Method | threaded hole |
| Screw Thread Quantity Per Inch | 32.0 |
| Mounting Lip Depth | 0.0620 inches nominal |
| Pilot Length | 0.0620 inches nominal |
| Iii Overall Diameter | 2.640 inches nominal |
| Reliability Indicator | not established |
| Electrical Resistance Per Section | 10.000 kilohms all sections |
| Section Quantity | 2 |
| Pilot Diameter | 0.7490 inches minimum and 0.7500 inches maximum |
| Mounting Hole/stud Circle Diameter | 1.250 inches nominal |
| Maximum Starting Torque | 2.00 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 3600.0 minimum |
| Shaft Length | 0.938 inches nominal |
| Screw Thread Diameter | 0.164 inches nominal |
| Function Characteristic Per Section | all sections linear |
| Pilot Diameter Runout | 0.00100 inches |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 5.0 free air all sections |
| Shaft Diameter | 0.250 inches maximum |
| Terminal Type And Quantity | 26 turret |
| Function Conformity Tolerance Per Section | -0.025 to 0.025 all sections |
| Fixed Tap Quantity Per Section | 7 2nd section |
| Function Conformity Per Section | all sections independent linearity |
| Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius | -25.0 to 25.0 all sections |
| ~1 | 450.0 2nd section and 900.0 2nd section and 1350.0 2nd section and 1800.0 2nd section and 2250.0 2nd section and 2700.0 2nd section and 3150.0 2nd section |
| Shaft Runout | 0.001 inches |
| Resistance Tolerance Per Section In Percent | -0.5 to 0.5 all sections |
| Body Style | 4b cylindrical servo mounted |
| Screw Thread Series Designator | unc |
| Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation | 300.0 1st section and 550.0 1st section and 800.0 1st section and 1050.0 1st section and 1300.0 1st section and 1550.0 1st section and 1800.0 1st section and 2050.0 1st section and 2300.0 1st section and 2500.0 1st section and 2800.0 1st section and |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 all sections |
| Effective Electrical Rotation In Deg Angular Rotation | 3600.0 minimum |
