| Mounting Facility Quantity | 4 single group |
| Thread Series Designator | unc single group |
| Thread Quantity Per Inch | 40 single group |
| Thread Direction (Non-Core) | right-hand single group |
| Winding Shielding Method | internal shield brought out to terminal single component |
| Center To Center Distance Between Mounting Facilities Parallel To Length | 1.156 inches nominal single mounting facility single center group |
| Inclosure Type | hermetically sealed |
| Terminal Type And Quantity | 6 tab, solder lug |
| Nominal Thread Size | 0.112 inches single group |
| Winding Tap Location (Non-Core) | center tap single component single secondary |
| Body Outside Diameter | 1.938 inches maximum |
| Mounting Method | threaded hole single group |
| Frequency Rating | 300.0 hertz minimum single component and 5.0 kilohertz maximum single component |
| Maximum Transformer Power Rating | 17.0 decibels single component |
| Thread Class (Non-Core) | 2b single group |
| Frequency Response Tolerance In Decibels (Non-Core) | -1.0/+1.0 single component |
| Impedance Rating In Ohms | 15000.0 nominal single component single primary |
| Center To Center Distance Between Mounting Facilities Parallel To Width | 1.156 inches nominal single mounting facility single center group |
| Body Length | 2.500 inches maximum |
| Primary To Secondary Turn Ratio | 1 to 2-19/64 single component |
| Winding Operating Current | 10.0 milliamperes maximum of standard range b and better drop siding single component single primary |
| Winding Function And Quantity | 1 primary single component and 1 secondary single component |
| Reliability Indicator | not established |
