PROTECTIVE PAK

In stock - will ship in 3 days or less Solid fiberboard construction with a buried conductive layer Includes two installed 3/8" stud snaps - socket snaps available Resists damage by hot soldering irons, solder, or flux RTT of top and bottom layers: 10E6 - 10E8 ohms - meets worksurface recommendation of ANSI/ESD S4.1 Thickness: 0.060" (1.5mm) Lead-free RoHS compliant Made in the United States of America "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).