| Departure From Cited Document | shaft modified |
| Mounting Facility Quantity | 2 |
| Terminal Location | radially positioned over less than half the circumference |
| Features Provided | shaft locking device and shaft seal |
| Electrical Resistance Per Section | 100.0 ohms single section |
| Section Quantity | 1 |
| Test Data Document | 81349-mil-r-22/13a specification |
| Mounting Hole/stud Circle Diameter | 3.760 inches nominal |
| Maximum Stop Torque | 240.00 inch-ounces (ounce-inches) |
| Overall Diameter | 10.675 inches nominal |
| Standard Taper Curve Per Section | a single section |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 390.0 single section |
| Rotary Actuator Travel In Angular Deg | 330.0 nominal |
| Shaft Length | 0.875 inches nominal |
| Body Length | 3.030 inches nominal |
| Body Diameter | 10.090 inches nominal |
| Actuator Travel Control Feature | stops |
| Shaft Bearing Type | bearing |
| Screw Thread Diameter | 0.250 inches nominal |
| Shaft Style | 2c round, flatted |
| Maximum Running Torque | 160.00 inch-ounces (ounce-inches) |
| Actuator Type | slider |
| Power Dissipation Rating Per Section In Watts | 750.0 heat sink single section |
| Terminal Type And Quantity | 3 tab, solder lug |
| Shaft Diameter | 0.375 inches nominal |
| Mounting Method | threaded hole |
| Flat Height | 0.361 inches nominal |
| Screw Thread Quantity Per Inch | 20.0 |
| Resistance Tolerance Per Section In Percent | -10.0 to 10.0 single section |
| Body Style | 22b cylindrical hole/slot mounted |
| Screw Thread Series Designator | unc |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 25.0 single section |
| First Flat Length | 0.815 inches nominal |
| Reliability Indicator | not established |
