| Shaft Flat/slot Angular Location | 116.0 degrees from nonturn device 2nd actuator |
| Features Provided | variable resistor provisions |
| Contact Load Current Rating | 500.0 milliamperes resistive load dc at sea level and 50.0 milliamperes inductive load dc at sea level |
| Err Default | err default |
| Thread Series Designator | unef single mounting facility |
| Individual Section Quantity | 2 |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 2.328 inches maximum |
| Switch Actuator Positioning Increment | 30.0 degrees 1st actuator |
| Pole Quantity | 1 each section rear |
| Shaft Length | 1.062 inches nominal 2nd actuator |
| Contact Voltage Rating In Volts | 115.0 ac at sea level |
| Switch Actuator Stop Device Type | fixed stop 1st actuator |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -65.0/+85.0 deg celsius |
| Shaft Type | round, hollowed, flatted 1st actuator |
| Terminal Type | tab, solder lug |
| Shaft Diameter | 0.125 inches nominal 2nd actuator |
| Overall Length | 3.436 inches nominal |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Mounting Method | threaded bushing w/panel seal single mounting facility |
| Flat Height | 0.216 inches nominal 1st actuator |
| Switch Actuator Indexing Position Quantity | 10 1st actuator |
| Nonturn Device Type | flatted bushing at 3:00 o'clock |
| Style Designator | circular wafer, bushing mount |
| Contact Switching Action | breaks before makes each section rear |
| First Flat Length | 0.250 inches nominal 2nd actuator |
| Detent Rotational Torque Range | +28.000/+96.000 inch-ounces single actuator |
| Throw Quantity | 10 each section rear |
