| Overall Height | 1.250 inches nominal |
| Precious Material | gold |
| Terminal Location | back single mating end single contact grouping |
| Thread Series Designator | unef and unef |
| Thread Quantity Per Inch | 20 and 18 |
| Insert Material | plastic epoxy single mating end |
| Test Data Document | 81349-mil-c-83723 specification |
| Thread Class | 2a and 2a |
| Included Contact Type | round pin single mating end single contact grouping |
| Contact Position Arrangement Style | aldf 16-10 single mating end |
| Precious Material And Weight | 0.010 gold grains, troy |
| Distance From Mounting Shoulder To Front Face | 0.708 inches minimum and 0.728 inches maximum |
| Environmental Protection | humidity resistant and salt water resistant and shock proof and vibration proof |
| Unthreaded Mounting Hole Diameter | 0.116 inches minimum and 0.125 inches maximum |
| Nominal Thread Length | 0.290 inches |
| Shell Surface Treatment | cadmium |
| Contact Surface Treatment | gold single mating end single contact grouping |
| Overall Width | 1.250 inches nominal |
| Contact Material | copper alloy single mating end single contact grouping |
| Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 0.969 inches nominal |
| Specification/standard Data | 81349-mil-c-83723/83 government specification |
| Center To Center Distance Between Mounting Facilities Parallel To Height | 0.969 inches nominal |
| Shell Surface Treatment Document And Classification | qq-p-416 fed spec single treatment response |
| Shell Type | solid |
| Included Contact Quantity | 10 single mating end single contact grouping |
| Operating Temp Rating | -65.0 deg celsius minimum and 200.0 deg celsius maximum |
| Connector Locking Method | externally threaded shell |
| Polarization Method | keyway or multiple keyway |
| Terminal Type | crimp single mating end single contact grouping |
| Overall Length | 1.430 inches maximum |
| Nominal Thread Size | 1.000 inches and 1.062 inches |
| Precious Material And Location | contact surfaces gold |
| Mating End Quantity | 1 |
| Insert Position In Deg | 0.0 and 95.0 and 145.0 and 220.0 and 255.0 |
| Thread Direction | right-hand and right-hand |
| Threaded Device Type | back shell and coupling facility |
| Contact Removability | removable single mating end single contact grouping |
| Shell Material Document And Classification | qq-a-367 fed spec single material response |
| Shell Material | aluminum alloy |
| Contact Surface Treatment Document And Classification | mil-g-45204 mil spec single treatment response single mating end single contact grouping |
