| Precious Material | gold |
| Terminal Location | back single mating end all contact groupings |
| Thread Tolerance Class | 6g external |
| Thread Series Designator | iso m and special acme |
| Insert Material | plastic epoxy single mating end |
| Thread Quantity Per Inch | 10 |
| Test Data Document | 81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type |
| Thread Pitch In Millimeters | 1.00 |
| Included Contact Type | round pin single mating end all contact groupings |
| Thread Class | 2b |
| Overall Diameter | 35.7 millimeters maximum |
| Contact Position Arrangement Style | 15-97 single mating end |
| Shell Surface Treatment | nickel |
| Contact Surface Treatment | gold single mating end all contact groupings |
| Contact Material | copper alloy single mating end all contact groupings |
| Specification/standard Data | 81349-mil-c-38999/26 government specification |
| Included Contact Quantity | 8 single mating end 2nd contact grouping |
| Shell Type | solid |
| Connector Locking Method | internally threaded coupling ring |
| End Item Identification | dsets bradley a3; test set, electronics |
| Polarization Method | keyway or multiple keyway |
| Terminal Type | crimp single mating end all contact groupings |
| Nominal Thread Size | 22.0 millimeters and 1.000 inches |
| Overall Length | 33.16 millimeters maximum |
| Precious Material And Location | contact surfaces gold |
| Insert Position In Deg | 0.0 and 95.0 and 141.0 and 208.0 and 236.0 |
| Mating End Quantity | 1 |
| Thread Direction | right-hand and right-hand |
| ~1 | data on certain environmental and performanc |
| Threaded Device Type | back shell and coupling facility |
| Body Style | straight shape, internal coupling |
| Contact Removability | removable single mating end all contact groupings |
| Shell Material | aluminum alloy |
