| Error Checking: | Non-ECC |
| Length: | 5.3" |
| Product Type: | RAM Module |
| Brand Name: | Crucial |
| Memory Size: | 1 GB |
| Number of Modules: | 1 x 1 GB |
| Manufacturer: | Crucial |
| Manufacturer Part Number: | CT12864Z335 |
| Device Supported: | Desktop PC |
| Memory Speed: | 333 MHz |
| CAS Latency: | CL2.5 |
| Marketing Information: | A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins. |
| Memory Technology: | DDR SDRAM |
| Memory Standard: | DDR333/PC2700 |
| Limited Warranty: | Lifetime |
| Signal Processing: | Unbuffered |
| Product Name: | 1GB (1 x 1 GB) DDR SDRAM Memory Module |
| Width: | 1.3" |
| Number of Pins: | 184-pin |
| Compatibility: | Desktop |
| Manufacturer Website Address: | http://www.crucial.com |
| Plating: | Gold Plated |
