| Err Default | err default |
| Terminal Location | rear end |
| Features Provided | humidity proof |
| Mounting Facility Quantity | 4 |
| Section Quantity | 2 |
| Electrical Resistance Per Section | 5.0 kilohms all sections |
| Test Data Document | 10001-2123322 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| Standard Taper Curve Per Section | a all sections |
| Maximum Starting Torque | 8.00 inch-ounces |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 all sections |
| Special Features | gun,5 in./54 cal.,mk-42+45; guided missile launching system,mk26; surface missile system; gun system |
| Longitudinal Actuator Effective Electrical Stroke Length | 4.720 inches nominal |
| Shaft Length | 1.000 inches nominal |
| Mounting Hole Diameter | 0.147 inches nominal |
| Body Length | 6.250 inches nominal |
| Criticality Code Justification | feat |
| Function Characteristic Per Section | all sections linear |
| Shaft Style | round, threaded |
| Longitudinal Actuator Travel | 4.735 inches minimum |
| Actuator Type | single shaft |
| Maximum Running Torque | 8.00 inch-ounces |
| Power Dissipation Rating Per Section In Watts | 1.0 free air all sections |
| Shaft Diameter | 0.187 inches maximum |
| Terminal Type And Quantity | 6 solder stud |
| Mounting Method | unthreaded hole |
| Function Conformity Tolerance Per Section | -0.50/+0.50 all sections |
| Body Width | 1.250 inches nominal |
| Function Conformity Per Section | all sections absolute linearity |
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 all sections |
| Body Style | rectangular |
| Body Height | 1.000 inches nominal |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 all sections |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -25.0/+25.0 all sections |
| Reliability Indicator | not established |
