Macromatic

TR-50222-08

RELAY; E-Mech; Time Delay; On Delay; 10A; DPDT; 120 VAC/DC; 0.6-60SEC; TR-5 Series

中间价(CNY):669.5056

推荐供应商

Digi-Key

Mouser

Heilind

TR-50222-08 规格参数

Reset Time	On Delay/Interval/Repeat Cycle/Delayed Interval: 0.1 Seconds, Off Delay/Single Shot/Watchdog/Triggered Delayed Interval: 0.04 Seconds
Temperature	12-120V Input Voltage: -28° to 65°C (-18° to 150°F) � 240V Input Voltage: -28° to 50°C (-18° to 122°F)
Voltage Tolerance	AC Operation: +10/-15% of nominal at 50/60 Hz., DC Operation: +10/-15% of nominal.
Output Current	10 Amp
Setting Accuracy	Maximum Setting (Adjustable): +5%, -0% � Minimum Setting (Adjustable): +0%, -50% � Fixed Time Delay: > 2 Seconds +1%, 0.1 - 2 Seconds +5%
Start-up Time	(Time from when power is applied until unit is timing) 120 & 240V units 0.05 Seconds � 12, 24 & 48V units 0.08 Seconds
Input Voltage	120 VAC/VDC
Mounting	8 Pin Octal
Function	On Delay
Repeat Accuracy (constant voltage and temperature)	> 2 Seconds Delay +0.1% � 0.1 - 2 Seconds Delay +2%
Type	Single Knob Unit
Maintain Function Time	(Time unit continues to time after power is removed) 0.01 Seconds for all units
Contact Configuration	2C DPDT
Load (Burden)	2 VA
Function Description	ON DELAY
Sub Category	Delay on Make
Life	Mechanical: 10,000,000 operations � Full Load: 100,000 operations
Insulation Voltage	2,000 volts
Main Category	Time Delay Relay
Timing Range	0.6 - 60 sec
Compatibility	On all units triggered by input voltage or by a control switch, do not use a solid state switch to initiate the timing sequenceproblems with leakage current could occur. On all units with a power trigger, do not use a solid state switch with leakage curre
Triggering Off Delay, Single Shot or Watchdog Units	Timing sequence must be initiated only after input voltage is applied to unit. Minimum required trigger switch closure time is 0.1 seconds.
Output Contacts	DPDT 10A @ 240V AC/28V DC, 1/2HP @ 240V AC, 1/3HP @ 120V AC B300 & R300; AC15 & DC13

展开

数据手册

Relay Specialties	预览	下载
Allied	预览	下载
element14	预览	下载
Newark	预览	下载