| Features Provided | nonmetallic shaft |
| Terminal Location | lower adjacent side two rows |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 100.0 ohms c and better flooring |
| Standard Taper Curve Per Section | a single section |
| Center To Center Distance Between Center Terminal And Outside Terminal | 0.290 nominal mils and 0.310 nominal centimeters |
| Maximum Starting Torque | 5.00 inch-ounces |
| Special Features | immersion sealed |
| Rotary Actuator Travel In Angular Deg | 4320.0 minimum and 6480.0 maximum |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 single section |
| Shaft Length | 0.045 inches minimum and 0.075 inches maximum |
| Body Length | 0.740 inches minimum and 0.760 inches maximum |
| Fragility Factor | moderately rugged |
| Actuator Travel Control Feature | clutch |
| Shaft Bearing Type | sleeve |
| Shaft Style | round, slotted |
| Cubic Measure | 0.041 cubic inches |
| Maximum Running Torque | 5.00 inch-ounces |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 0.75 7th secondary quality |
| Shaft Diameter | 0.090 inches minimum and 0.110 inches maximum |
| Terminal Type And Quantity | 3 pin |
| Mounting Method | terminal |
| Body Width | 0.150 inches minimum and 0.170 inches maximum |
| Terminal Length | 0.150 inches minimum |
| Body Style | rectangular |
| Resistance Tolerance Per Section In Percent | -20.0/+20.0 single section |
| Center To Center Distance Between Terminal Rows | 0.090 inches minimum and 0.110 inches maximum |
| Center To Center Distance Between Terminals | 0.690 inches minimum and 0.710 inches maximum |
| Body Height | 0.300 inches minimum and 0.320 inches maximum |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 25.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 4320.0 minimum and 6480.0 maximum |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -100.0/+100.0 single section |
