| Contact Load Current Rating | 1.0 amperes inductive load dc at sea level |
| Nonturn Device Radius | 0.360 inches minimum and 0.390 inches maximum at 3:00 o'clock |
| Individual Section Quantity | 2 |
| Thread Series Designator | unef single mounting facility |
| Test Data Document | 81349-mils3786 specification |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 1.155 inches minimum and 1.195 inches maximum |
| Switch Actuator Positioning Increment | 60.0 degrees single actuator |
| Pole Quantity | 1 each section front |
| Shaft Length | 0.834 inches minimum and 0.914 inches maximum single actuator |
| Iii Operating Temp Range | -65.0 to 125.0 deg celsius |
| Contact Voltage Rating In Volts | 115.0 ac at sea level |
| Rotor Through Connection Quantity | 1 each section |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Thread Length | 0.417 inches minimum and 0.457 inches maximum single mounting facility |
| Shaft Type | round, flatted single actuator |
| Terminal Type | tab, solder lug |
| Overall Length | 2.185 inches minimum and 2.331 inches maximum |
| Shaft Diameter | 0.248 inches minimum and 0.251 inches maximum single actuator |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Mounting Method | threaded bushing single mounting facility |
| Iii Shaft Flat/slot Angular Location | 180.0 degrees from contact position 1 single actuator |
| Iii Hazardous Locations/environmental Protection | explosion proof |
| Flat Height | 0.215 inches minimum and 0.223 inches maximum single actuator |
| Nonturn Device Type | tab at 3:00 o'clock |
| Switch Actuator Indexing Position Quantity | 6 single actuator |
| Style Designator | 9 tap, circular, bushing mount |
| Iii Detent Rotational Torque Range | 8.0 to 115.0 inch-ounces single actuator |
| First Flat Length | 0.230 inches minimum and 0.270 inches maximum single actuator |
| Contact Switching Action | breaks before makes each section rear |
| Throw Quantity | 6 each section rear |
