| Terminal Location | longitudinally positioned on the circumference |
| Mounting Facility Quantity | 3 |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 15.000 kilohms single section |
| Pilot Diameter | 0.62400 inches minimum and 0.62500 inches maximum |
| Test Data Document | 24930-123081 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| Maximum Stop Torque | 128.00 inch-ounces |
| Maximum Starting Torque | 0.60 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 3600.0 minimum |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 85.0 single section |
| Mechanical Backlash In Deg Angular Rotation | 1.0 |
| Shaft Length | 0.594 inches minimum and 0.656 inches maximum |
| Tap Location Tolerance Per Section | -2.0/+2.0 deg angular rotation 1st section |
| Body Length | 1.562 inches minimum and 1.580 inches maximum |
| Actuator Travel Control Feature | stops |
| Body Diameter | 0.875 inches nominal |
| Shaft Bearing Type | ball |
| Function Characteristic Per Section | single section linear |
| Shaft Style | round |
| Undercut Width | 0.05700 inches minimum |
| Actuator Type | single shaft |
| Undercut Diameter | 0.750 inches nominal |
| Maximum Running Torque | 0.50 inch-ounces |
| Power Dissipation Rating Per Section In Watts | 1.5 free air single section |
| Shaft Diameter | 0.125 inches nominal |
| Terminal Type And Quantity | 3 solder stud |
| Overall Length | 2.156 inches minimum and 2.236 inches maximum |
| Mounting Method | clamp ring |
| Mounting Lip Diameter | 0.87500 inches nominal |
| Function Conformity Tolerance Per Section | -0.05/+0.05 single section |
| Fixed Tap Quantity Per Section | 3 single section |
| Function Conformity Per Section | single section independent linearity |
| Mounting Lip Depth | 0.06200 inches nominal |
| Pilot Length | 0.06200 inches nominal |
| Body Style | cylindrical servo mounted |
| Resistance Tolerance Per Section In Percent | -3.0/+3.0 single section |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 3600.0 minimum |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -20.0/+20.0 single section |
| Reliability Indicator | not established |
