| Mounting Facility Quantity | 1 |
| Terminal Location | rear end |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 200.000 ohms single section |
| Iii Overall Length | 6.415 inches minimum |
| Standard Taper Curve Per Section | a single section |
| Maximum Starting Torque | 5.00 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 9000.0 nominal |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 175.0 single section |
| Iii Overall Height | 0.375 inches nominal |
| Shaft Length | 0.040 inches nominal |
| Mounting Hole Diameter | 0.074 inches nominal |
| Body Length | 0.375 inches nominal |
| Actuator Travel Control Feature | continuous motion |
| Lateral Distance Between Mounting Hole Centers | any acceptable |
| Shaft Style | 3c round, slotted |
| Iii Overall Width | 0.203 inches nominal |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 1.0 free air single section |
| Shaft Diameter | 0.090 inches nominal |
| Terminal Type And Quantity | 3 wire lead |
| Mounting Method | unthreaded hole |
| Body Width | 0.203 inches nominal |
| Body Style | 32b rectangular w/mounting holes |
| Terminal Length | 6.000 inches nominal |
| Resistance Tolerance Per Section In Percent | -10.0 to 10.0 single section |
| Body Height | 0.375 inches nominal |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 single section |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -150.0 to 150.0 single section |
