| Shaft Flat/slot Angular Location | 195.0 degrees from nonturn device single actuator |
| Contact Load Current Rating | 500.0 milliamperes resistive load dc at altitude |
| Nonturn Device Radius | 0.375 inches nominal at 3:00 o'clock |
| Individual Section Quantity | 3 |
| Thread Series Designator | unef single mounting facility |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 1.068 inches maximum |
| Switch Actuator Positioning Increment | 30.0 degrees single actuator |
| Pole Quantity | 1 each section front |
| Shaft Length | 0.847 inches nominal single actuator |
| Contact Voltage Rating In Volts | 28.0 |
| Hazardous Locations/environmental Protection | explosion proof |
| Switch Actuator Stop Device Type | adjustable stop single actuator |
| Rotor Through Connection Quantity | 1 each section |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -5.0/+71.0 deg celsius |
| Thread Length | 0.410 inches nominal single mounting facility |
| Shaft Type | round, flatted single actuator |
| Terminal Type | tab, solder lug |
| Shaft Diameter | 0.250 inches nominal single actuator |
| Overall Length | 2.557 inches maximum |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Mounting Method | threaded bushing single mounting facility |
| Flat Height | 0.214 inches nominal single actuator |
| Nonturn Device Type | tab at 3:00 o'clock |
| Switch Actuator Indexing Position Quantity | 12 single actuator |
| Style Designator | 9 tap, circular, bushing mount |
| First Flat Length | 0.250 inches nominal single actuator |
| Contact Switching Action | breaks before makes each section rear |
| Detent Rotational Torque Range | +0.7/+5.0 inch-pounds (pound-inches) single actuator |
| Throw Quantity | 5 each section rear |
