| Shaft Flat/slot Angular Location | 195.0 degrees from nonturn device single actuator |
| Err Default | err default |
| Contact Load Current Rating | 50.0 milliamperes resistive load ac at sea level |
| Nonturn Device Radius | 0.375 inches nominal at 3:00 o'clock |
| Thread Series Designator | unef single mounting facility |
| Individual Section Quantity | 1 |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 1.328 inches maximum |
| Switch Actuator Positioning Increment | 30.0 degrees single actuator |
| Pole Quantity | 1 single section front |
| Shaft Length | 0.437 inches nominal single actuator |
| Contact Voltage Rating In Volts | 30.0 dc at sea level |
| Hazardous Locations/environmental Protection | explosion proof |
| Switch Actuator Stop Device Type | fixed stop single actuator |
| Rotor Through Connection Quantity | 1 single section |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -65.0/+85.0 deg celsius |
| Shaft Type | round, flatted single actuator |
| Terminal Type | tab, solder lug |
| Shaft Diameter | 0.250 inches nominal single actuator |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Overall Length | 1.974 inches nominal |
| Mounting Method | threaded bushing single mounting facility |
| Flat Height | 0.214 inches nominal single actuator |
| Nonturn Device Type | tab at 3:00 o'clock |
| Switch Actuator Indexing Position Quantity | 2 single actuator |
| Style Designator | tap, circular, bushing mount |
| First Flat Length | 0.250 inches nominal single actuator |
| Contact Switching Action | breaks before makes single section rear |
| Detent Rotational Torque Range | +12.000/+128.000 inch-ounces single actuator |
| Throw Quantity | 2 single section rear |
