| Shaft Flat/slot Angular Location | 216.0 degrees from nonturn device |
| Contact Load Current Rating | 2.0 amperes resistive load and 1.0 amperes inductive load |
| Nonturn Device Radius | 0.360 inches minimum and 0.390 inches maximum |
| Individual Section Quantity | 2 |
| Thread Series Designator | unef |
| Thread Class | 2a |
| Overall Diameter | 0.985 inches minimum and 1.015 inches maximum |
| Switch Actuator Positioning Increment | 36.0 degrees |
| Pole Quantity | 1 |
| Special Features | item must comply with rqmt of desc production std no. l00430 |
| Shaft Length | 0.834 inches minimum and 0.914 inches maximum |
| Contact Voltage Rating In Volts | 115.0 |
| Hazardous Locations/environmental Protection | explosion proof |
| Switch Actuator Stop Device Type | fixed stop |
| Rotor Through Connection Quantity | 1 |
| Criticality Code Justification | feat |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | m65.0/p125.0 deg celsius |
| Thread Length | 0.417 inches minimum and 0.457 inches maximum |
| Shaft Type | round,flatted |
| Terminal Type | tab,solder lug |
| Nominal Thread Size | 0.375 inches |
| Overall Length | 2.153 inches minimum and 2.223 inches maximum |
| Shaft Diameter | 0.248 inches minimum and 0.251 inches maximum |
| Mounting Method | threaded bushing |
| Flat Height | 0.215 inches minimum and 0.221 inches maximum |
| Nonturn Device Type | tab |
| Switch Actuator Indexing Position Quantity | 2 |
| Style Designator | tap,circular,bushing mount |
| Contact Switching Action | breaks before makes |
| First Flat Length | 0.230 inches minimum and 0.270 inches maximum |
| Detent Rotational Torque Range | p0.5/p2.5 inch-pounds (pound-inches) |
| Throw Quantity | 2 |
