| Shaft Flat/slot Angular Location | 195.0 degrees from nonturn device single actuator |
| Contact Load Current Rating | 1.0 amperes inductive load dc at sea level |
| Err Default | err default and err default |
| Nonturn Device Radius | 0.360 inches minimum at 3:00 o'clock and 0.390 inches maximum at 3:00 o'clock |
| Individual Section Quantity | 2 |
| Thread Series Designator | unef single mounting facility |
| Test Data Document | 81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 1.100 inches minimum and 1.306 inches maximum |
| Switch Actuator Positioning Increment | 30.0 degrees single actuator |
| Pole Quantity | 1 each section front |
| Shaft Length | 0.834 inches minimum single actuator and 0.914 inches maximum single actuator |
| Contact Voltage Rating In Volts | 115.0 ac at sea level |
| Hazardous Locations/environmental Protection | explosion proof |
| Switch Actuator Stop Device Type | fixed stop single actuator |
| Rotor Through Connection Quantity | 1 each section |
| Specification/standard Data | 81349-mil-s-3786/4 government specification |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -65.0/+85.0 deg celsius |
| Shaft Type | round, flatted single actuator |
| Terminal Type | tab, solder lug |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Overall Length | 2.112 inches minimum and 2.378 inches maximum |
| Shaft Diameter | 0.248 inches minimum single actuator and 0.251 inches maximum single actuator |
| Mounting Method | threaded bushing single mounting facility |
| Flat Height | 0.215 inches minimum single actuator and 0.221 inches maximum single actuator |
| ~1 | data on certain environmental and performance |
| Switch Actuator Indexing Position Quantity | 4 single actuator |
| Nonturn Device Type | tab at 3:00 o'clock |
| Style Designator | tap, circular, bushing mount |
| Contact Switching Action | breaks before makes each section rear |
| First Flat Length | 0.230 inches minimum single actuator and 0.270 inches maximum single actuator |
| Detent Rotational Torque Range | +0.500/+2.500 inch-pounds single actuator |
| Throw Quantity | 4 each section rear |
