| Terminal Location | rear end |
| Electrical Resistance Per Section | 10.000 kilohms single section |
| Nonturn Device Radius | 0.770 inches minimum and 0.800 inches maximum |
| Section Quantity | 1 |
| Maximum Stop Torque | 64.00 inch-ounces |
| Overall Diameter | 0.770 inches minimum and 0.800 inches maximum |
| Standard Taper Curve Per Section | a single section |
| Special Features | center connector,wiper and case gold plated,crimp on cover gold plated over stress-free nickel plate |
| Rotary Actuator Travel In Angular Deg | 265.0 minimum and 275.0 maximum |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 105.0 single section |
| Body Length | 0.453 inches nominal |
| Actuator Travel Control Feature | continuous motion |
| Body Diameter | 0.770 inches minimum and 0.800 inches maximum |
| Contact Arm Electrical Off Position | fully ccw |
| Function Characteristic Per Section | single section linear |
| Maximum Running Torque | 10.00 inch-ounces |
| Actuator Type | flush drive with slot-hole |
| Power Dissipation Rating Per Section In Watts | 2.0 heat sink single section |
| Overall Length | 0.453 inches nominal |
| Terminal Type And Quantity | 3 tab w/screw |
| Nonturn Device Location | at 3 oclock and at 9 oclock |
| Mounting Method | tab |
| Body Style | cylindrical bushing mounted |
| Terminal Length | 0.312 inches nominal |
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 single section |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 55.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 235.0 minimum and 245.0 maximum |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -20.0/+20.0 single section |
| Reliability Indicator | not established |
