| Overall Height | 1.312 inches nominal |
| Shaft Flat/slot Angular Location | 120.0 degrees from nonturn device single actuator |
| Err Default | err default |
| Contact Load Current Rating | 2.0 amperes resistive load dc at sea level |
| Nonturn Device Radius | 0.531 inches nominal at 3:00 o'clock |
| Thread Series Designator | unef single mounting facility |
| Individual Section Quantity | 1 |
| Test Data Document | 81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type |
| Thread Class | 2a single mounting facility |
| Switch Actuator Positioning Increment | 30.0 degrees single actuator |
| Pole Quantity | 2 single section rear |
| Shaft Length | 0.688 inches nominal single actuator |
| Width Between Flats | 0.188 inches nominal single actuator |
| Contact Voltage Rating In Volts | 28.0 dc at sea level |
| Switch Actuator Stop Device Type | fixed stop single actuator |
| Overall Width | 1.188 inches nominal |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -65.0/+85.0 deg celsius |
| Shaft Type | round, parallel flatted, threaded hole single actuator |
| Terminal Type | tab, solder lug |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Overall Length | 1.848 inches nominal |
| Shaft Diameter | 0.250 inches nominal single actuator |
| Mounting Method | threaded bushing single mounting facility |
| ~1 | data on certain environmental and performance |
| Nonturn Device Type | pin at 3:00 o'clock |
| Switch Actuator Indexing Position Quantity | 5 single actuator |
| Style Designator | circular wafer, bushing mount |
| First Flat Length | 0.250 inches nominal single actuator |
| Contact Switching Action | breaks before makes single section rear |
| Detent Rotational Torque Range | +1.000/+8.000 inch-pounds single actuator |
| Throw Quantity | 5 single section rear |
