| Thread Series Designator | unc |
| Thread Quantity Per Inch | 32 |
| Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps | 1000.0 ac single location |
| Center To Center Distance Between Terminals Parallel To Length | 1.555 inches minimum and 1.565 inches maximum |
| Reset Method | manual |
| Circuit Protection Type | overcurrent single location |
| Pole Quantity | 1 |
| Manual Actuator Type And Quantity | 1 toggle |
| Mounting Facility Type And Quantity | 2 threaded hole |
| Actuator Function | trip-reset |
| Operating Voltage Type And Rating Per Pole In Volts | 250.0 ac single location |
| Body Length | 1.985 inches minimum and 2.015 inches maximum |
| Fragility Factor | moderately rugged |
| Actuator Position Designation | at pole one |
| Trip Release Method | magnetic-hydraulic single location |
| Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent | 125.0 single location |
| Main Contact Tripping Mechanism Type | trip free |
| Case Material | plastic |
| Inclosure Protection Type For Which Designed | fungus resistant and moisture resistant |
| Boss Height | 0.125 inches minimum and 0.135 inches maximum |
| Trip Release Characteristic | instantaneous single location |
| Unpackaged Unit Weight | 2.500 ounces |
| Frequency In Hertz | 60.0 single location |
| Nominal Thread Size | 0.138 inches |
| Terminal Type And Quantity | 2 tab, solder lug |
| Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 1.655 inches minimum and 1.665 inches maximum |
| Mounting Surface To Terminal End Distance | 1.875 inches minimum and 1.885 inches maximum |
| Body Width | 0.745 inches minimum and 0.755 inches maximum |
| Body Style | single pole type |
| Arc Quenching Method | magnetic blowout |
| Maximum Continuous Load Current Rating Per Pole | 15.0 amperes ac single location |
| Storage Type | general purpose warehouse |
| Internal Trip Release Configuration | series trip single location |
