| Thread Series Designator | unc |
| Thread Quantity Per Inch | 32 |
| Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps | 5000.0 ac single location |
| Center To Center Distance Between Terminals Parallel To Length | 3.550 inches nominal |
| Reset Method | manual |
| Circuit Protection Type | overcurrent single location |
| Pole Quantity | 1 |
| Manual Actuator Type And Quantity | 1 toggle |
| Mounting Facility Type And Quantity | 2 threaded hole |
| Actuator Function | trip-reset |
| Operating Voltage Type And Rating Per Pole In Volts | 240.0 ac single location |
| Body Length | 5.125 inches nominal |
| Fragility Factor | moderately rugged |
| Actuator Position Designation | at pole one |
| Trip Release Method | magnetic single location |
| Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent | 125.0 single location |
| Main Contact Tripping Mechanism Type | trip free |
| Case Material | plastic |
| Inclosure Protection Type For Which Designed | dustproof and hermetically sealed |
| Boss Height | 0.220 inches nominal |
| Trip Release Characteristic | time delay single location |
| Frequency In Hertz | 50.0 single location or 60.0 single location |
| Nominal Thread Size | 0.138 inches |
| Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 2.750 inches nominal |
| Terminal Type And Quantity | 2 threaded stud |
| Mounting Surface To Terminal End Distance | 3.550 inches nominal |
| Body Width | 1.026 inches nominal |
| Special Handling Feature | magnetic |
| Body Style | single pole type |
| Trip Delay Time In Seconds Per Rated Continuous Current | 20.000 minimum at 200 pct single location and 120.000 maximum at 200 pct single location |
| Arc Quenching Method | magnetic blowout |
| Maximum Continuous Load Current Rating Per Pole | 50.0 amperes ac single location |
| Storage Type | general purpose warehouse |
| Internal Trip Release Configuration | series trip single location |
