| Thread Series Designator | uns |
| Thread Quantity Per Inch | 32 |
| Test Data Document | 99193-379868 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| Center To Center Distance Between Terminals Parallel To Length | 0.704 inches nominal |
| Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps | 6.0 dc single location |
| Reset Method | manual |
| Pole Quantity | 1 |
| Manual Actuator Type And Quantity | 1 push-pull |
| Circuit Protection Type | overcurrent single location |
| Mounting Facility Type And Quantity | 1 threaded bushing |
| Actuator Function | trip-reset |
| Operating Voltage Type And Rating Per Pole In Volts | 28.0 dc single location |
| Body Length | 1.137 inches maximum |
| Actuator Position Designation | at pole one |
| Trip Release Method | magnetic single location |
| Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent | 145.0 single location |
| Main Contact Tripping Mechanism Type | trip free |
| Case Material | plastic |
| Ultimate Trip Time Per Pole In Seconds | 300.000 maximum single location |
| Trip Release Characteristic | time delay single location |
| Nominal Thread Size | 0.469 inches |
| Terminal Type And Quantity | 2 screw |
| Bushing Length | 0.469 inches nominal |
| Mounting Surface To Terminal End Distance | 1.812 inches maximum |
| Body Width | 0.750 inches maximum |
| Body Style | single pole type |
| Trip Delay Time In Seconds Per Rated Continuous Current | 0.040 minimum at 200 pct single location and 20.000 maximum at 200 pct single location |
| Maximum Continuous Load Current Rating Per Pole | 3.0 amperes dc single location |
| Storage Type | general purpose warehouse |
| Internal Trip Release Configuration | series trip single location |
