| Terminal Location | radially positioned over less than half the circumference |
| Features Provided | nonmetallic shaft |
| Electrical Resistance Per Section | 5.000 kilohms single section |
| Section Quantity | 1 |
| Pilot Diameter | 1.8750 inches maximum |
| Overall Diameter | 2.734 inches maximum |
| Shaft Radial Play | 0.001 inches |
| Shaft End Play | 0.00500 inches |
| Maximum Starting Torque | 1.00 inch-ounces (ounce-inches) |
| Rotary Actuator Travel In Angular Deg | 360.0 nominal |
| Shaft Length | 0.531 inches minimum and 0.594 inches maximum |
| Body Length | 1.312 inches maximum |
| Actuator Travel Control Feature | continuous motion |
| Body Diameter | 2.000 inches nominal |
| Shaft Bearing Type | ball |
| Function Characteristic Per Section | single section linear |
| Lateral Runout | 0.002 inches |
| Undercut Width | 0.0730 inches minimum |
| Pilot Diameter Runout | 0.00200 inches |
| Actuator Type | single shaft |
| Maximum Running Torque | 0.75 inch-ounces (ounce-inches) |
| Undercut Diameter | 1.875 inches maximum |
| Power Dissipation Rating Per Section In Watts | 3.5 free air single section |
| Overall Length | 1.906 inches maximum |
| Shaft Diameter | 0.250 inches nominal |
| Terminal Type And Quantity | 3 tab,solder lug |
| Mounting Method | clamp ring |
| Mounting Lip Diameter | 1.9950 inches minimum and 2.0050 inches maximum |
| Function Conformity Tolerance Per Section | m0.25/p0.25 single section |
| Function Conformity Per Section | single section terminal base linearity |
| Mounting Lip Depth | 0.0880 inches minimum and 0.0980 inches maximum |
| Shaft Runout | 0.001 inches |
| Pilot Length | 0.0570 inches minimum and 0.0670 inches maximum |
| Resistance Tolerance Per Section In Percent | m5.0/p5.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 355.0 nominal |
| Reliability Indicator | not established |
