| Mounting Facility Quantity | 2 |
| Terminal Location | lower adjacent side single row |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 500.0 kilohms single section |
| Iii Overall Length | 0.780 inches minimum and 0.840 inches maximum |
| Standard Taper Curve Per Section | a single section |
| Center To Center Distance Between Center Terminal And Outside Terminal | 0.100 inches nominal |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 105.0 single section |
| Iii Overall Height | 0.520 inches minimum and 0.600 inches maximum |
| Shaft Length | 0.060 inches nominal |
| Mounting Hole Diameter | 0.086 inches nominal |
| Body Length | 0.735 inches minimum and 0.765 inches maximum |
| Contact Arm Electrical Off Position | fully ccw |
| Lateral Distance Between Mounting Hole Centers | 0.500 inches nominal |
| Shaft Style | 3c round, slotted |
| Iii Overall Width | 0.270 inches minimum and 0.290 inches maximum |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 0.7 free air single section |
| Terminal Type And Quantity | 3 pin |
| Shaft Diameter | 0.100 inches nominal |
| Mounting Method | unthreaded hole |
| Body Width | 0.180 inches minimum and 0.200 inches maximum |
| Body Style | 26b rectangular w/mounting holes/slots |
| Terminal Length | 0.185 inches minimum and 0.255 inches maximum |
| Resistance Tolerance Per Section In Percent | -10.0 to 10.0 single section |
| Center To Center Distance Between Terminals | 0.490 inches minimum and 0.510 inches maximum |
| Body Height | 0.345 inches minimum and 0.375 inches maximum |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 25.0 single section |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -250.0 to 0.0 single section |
