| Terminal Location | radially positioned over less than half the circumference |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 10.000 kilohms single section |
| Nonturn Device Radius | 0.328 inches nominal |
| Overall Diameter | 1.071 inches maximum |
| Shaft Radial Play | 0.002 inches |
| Shaft End Play | 0.01000 inches |
| Maximum Starting Torque | 0.60 inch-ounces (ounce-inches) |
| Rotary Actuator Travel In Angular Deg | 3600.0 nominal |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 single section |
| Shaft Length | 0.812 inches nominal |
| Body Length | 0.750 inches nominal |
| Actuator Travel Control Feature | stops |
| Body Diameter | 0.875 inches nominal |
| Shaft Bearing Type | sleeve |
| Function Characteristic Per Section | single section linear |
| Screw Thread Diameter | 0.375 inches nominal |
| Mounting Bushing Length | 0.250 inches nominal |
| Lateral Runout | 0.004 inches |
| Pilot Diameter Runout | 0.00400 inches |
| Actuator Type | single shaft |
| Maximum Running Torque | 0.60 inch-ounces (ounce-inches) |
| Power Dissipation Rating Per Section In Watts | 2.0 free air single section |
| Shaft Diameter | 0.2495 inches minimum and 0.250 inches maximum |
| Terminal Type And Quantity | 3 tab,solder lug |
| Overall Length | 1.562 inches nominal |
| Nonturn Device Location | at 12 oclock |
| Mounting Method | standard bushing |
| Function Conformity Tolerance Per Section | m0.20/p0.20 single section |
| Function Conformity Per Section | single section independent linearity |
| Screw Thread Quantity Per Inch | 32.0 |
| Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius | m20.0/p20.0 single section |
| Shaft Runout | 0.0016 inches |
| Resistance Tolerance Per Section In Percent | m3.0/p3.0 single section |
| Screw Thread Series Designator | unef |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 3600.0 nominal |
| Reliability Indicator | not established |
