| Vibration resistance - Functional - In de-energized condition | 29.4 m/s^2 {3 G}, 10 to 55 Hz at double amplitude of 0.5 mm (in contact direction), 98 m/s^2 {10 G}10 to 55 Hz at double amplitude of 1.6 mm (perpendicular to contact) |
| Expected life (min. operations) - Mechanical | 10^8 |
| Vibration resistance - Destructive | 196 m/s^2 {20 G}, 10 to 55 Hz at double amplitude of 3.3 mm |
| Max. operating speed | 50 cps |
| Electrostatic capacitance - Contact/Coil | Approx. 7 pF |
| Contact bounce | Approx. 1.5 ms |
| Pick-up voltage, (max.) | 38.4 VDC |
| Nominal operating power | 330 mW |
| Operate time (at nominal voltage) | Max. 15 ms (Approx. 10 ms) |
| Expected life (min. operations) - Electrical (Resistive) | 2 A 30 V DC: 2x10^5, 1 A 30 V DC: 10^6, 0.5 A 30 V DC: 10^7 |
| Contact Material | Gold-cap over silver palladium |
| Initial breakdown voltage - Between open contacts | 750 Vrms |
| Rating, (resistive load) - Max. switching current | 2 A |
| Electrostatic capacitance - Contact/Contact | Approx. 4 pF |
| Electrostatic capacitance - Contact/Ground | Approx. 6 pF |
| Initial contact resistance (By voltage drop 6 V DC 1 A) | Max.: 50 mohm, Typical: 25 mohm |
| MBB Function | Form C type |
| Nominal operating power, at 25 �C | 2C: Approx. 300 mW, 4C: Approx. 480 mW |
| Inductance, Armarure - Open | 4.12 H |
| Initial breakdown voltage - Between contacts and coil | 1,000 Vrms |
| Release time (without diode) (at nominal voltage) | Max. 10 ms (Approx. 3 ms) |
| Inductance, Armarure - Close | 4.18 H |
| Rating, (resistive load) - Max. switching power | 60 W 100 VA |
| Shock resistance - Destructive | Min. 980 m/s^2 {100 G} |
| Max. operating power for continuous duty | Approx. 1 W at 40 �C 104 �F |
| Shock resistance - Functional - In energized condition | Min. 196 m/s^2 {20 G} |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Initial insulation resistance | 1,000 Mohm at 500 V DC |
| Contact Configuration | 2C DPDT |
| Initial breakdown voltage - Between live parts and ground | 1,000 Vrms |
| Shock resistance - Functional - In de-energized condition | Min. 29.4 m/s^2 {3 G} (In contact direction), Min. 98 m/s^2 {10 G} (perpendicular to contact) |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms |
| Rating, (resistive load) - Max. switching voltage | 220 V AC, DC |
| Drop-out voltage, (min.) | 4.8 VDC |
| Sub Category | General Purpose Relay |
| Coil Voltage | 48 VDC |
| Main Category | Relays |
| Vibration resistance - Functional - In energized condition | 117.6 m/s^2 {12 G}10 to 55 Hz at double amplitude of 2 mm |
| Max. allowable voltage, (at 40 �C) | 84 VDC |
| Current | 2 Amps |
| Coil resistance | 7000 ohm |
