| Initial breakdown voltage - Between contacts sets | 1,000 Vrms |
| Reset time (latching) (at nominal voltage) | Approx. 3 ms |
| Maximum allowable voltage, (at 50°C 122°F) | 24 VDC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Expected life (min. operations) - Mechanical | 1×10^8 |
| Minimum operating power | Approx. 98 mW (147 mW: 48 V) |
| Reverse polarity | Yes |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| Rating (resistive) - Max. switching voltage | 220 V DC, 250 V AC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp. | 40°C to +70°C, 40°F to +158°F |
| Pick-up voltage, (max.) | 8.4 VDC |
| Nominal operating power | Approx. 200 mW (300 mW: 48 V) |
| Operate time (at nominal voltage) | Approx. 4 ms |
| Release time (at nominal voltage) | Approx. 3 ms |
| Initial contact resistance, max. (By voltage drop 6 V DC 1 A) | 50 mohm |
| Initial breakdown voltage - Between open contacts | 750 Vrms |
| Rating (resistive) - Max. carrying current | 3A |
| Coil resistance, (±10%) | 720 ohm |
| Contact material | Gold-clad silver |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Rating (resistive) - Max. switching power | 60 W, 62.5 VA |
| Initial breakdown voltage - Between contacts and coil | 1,000 Vrms |
| Set time (latching) (at nominal voltage) | Approx. 3 ms |
| Shock resistance - Destructive | Min. 980 m/s^2 {100 G} |
| Mounting | PC Board |
| Nominal operating current (±10%) | 16.7 mA |
| Rating (resistive) - Max. switching current | 2A |
| Operating Function | Single Side Stable |
| Initial insulation resistance | Min. 100 Mohm (at 500 V DC) |
| FCC surge voltage between contacts and coil | 1,500 V |
| Temperature rise (at nominal voltage, Contact current: 2A) | Max. 65°C with nominal voltage across coil and at nominal switching capacity |
| Contact Configuration | 2C DPDT |
| Expected life (min. operations) - Electrical 2 A 30 VDC resistive | 1 A 30 V DC - 5×10^5, 2 A 30 V DC - 1×10^5 |
| Drop-out voltage, (min.) | 1.2 VDC |
| Sub Category | Signal Relay |
| Coil Voltage | 12 VDC |
| Main Category | Relays |
| Shock resistance - Functional | Min. 490 m/s^2 {50 G} |
| Current | 2 Amps |
