| Nominal switching capacity (resistive load) | 1 A 30 V DC, 0.3 A 125 V AC |
| Expected life (min.operations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive - 10^5, 0.3 A 125 V AC resistive - 10^5 |
| Operate time [Set time] (at 20�C) | Max. 4 ms (Approx. 2 ms), [Max. 4 ms (Approx. 2 ms)] |
| Unit weight | Approx. 1 g .035 oz |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Initial surge voltage - Between open contacts (10�160 ?s) | 1,500 V (FCC Part 68) |
| Nominal operating current, (�10%) | 9.6 mA |
| Initial surge voltage - Between contacts and coil (2�10 ?s) | 2,500 V (Telcordia) |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| Max. switching power (resistive load) | 30 W, 37.5 V A |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp. | �40°C to 85°C, �40°F to 185°F |
| Nominal operating power | 140mW (1.5 to 12 V DC), 230mW (24 V DC) |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1min. |
| Release time (without diode) [Reset time] (at 20�C) | Max. 4 ms (Approx. 1 ms), [Max. 4 ms (Approx. 2 ms)] |
| Temperature rise (at 20�C) | Max. 50°C |
| Max. switching current | 1 A |
| Min. switching capacity | 10 ?A 10 mV DC |
| Contact material | Stationary: AgPd+Au clad Movable: AgPd |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Drop-out voltage, (min.) (initial) | 2.4 VDC |
| Max. switching voltage | 110 V DC, 125 V AC |
| Shock resistance - Destructive | Min. 1,000 m/s^2{100G] |
| Expected life (min.operations) - Mechanical (at 750 cpm) | 5 � 10^7 |
| Mounting | SMD |
| Operating Function | Single Side Stable |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Contact Configuration | 2C DPDT |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1min. |
| Pick-up voltage, (max.) (initial) | 18 VDC |
| Max. allowable voltage | 28.8 VDC |
| Sub Category | Signal Relay |
| Coil Voltage | 24 VDC |
| Packaging | Tape and reel packing |
| Main Category | Relays |
| Coil resistance, (�10%) | 2504 ohm |
| Shock resistance - Functional | Min. 750 m/s^2{75G] |
| Current | 1 Amp |
| Initial breakdown voltage - Between contact and coil | 1,500 Vrms for 1min. |
| Initial contact resistance, max. (By voltage drop 6 V DC 1A ) | 100 mohm |
